Check engine light was off when brought in. Scan for fault codes – P0108 (MAP snscircuit high) stored fault. Check harness and connector to sensor – ok. Check MAP sensor signal voltage from engine off to engine running and sensor is reading normally at this time. Most likely and intermittent sensor failure. Recommend replacing sensor. Clear fault code.
Remove and reinstall engine cover. Replace MAP sensor. Road test – ok.
PHIL F. gave our service a 5 star review on 2/7/2023
Vehicles temp gauge is INOPERABLE. Scanner throws code 1D2008 Recommending bleeding cooling system or replacing thermostat. Cooling system test was done to confirm thermostat and coolant temp gauge works. Also checked the instrument cluster to see if all gauges work.
Removed and replaced both front parking bulbs
Removed air box then the three coolant hoses connected to the thermostat assembly to drain coolant. Removed and replaced thermostat assembly then used vacuum purge kit to fill coolant in cooling system. Washed coolant off of engine and subframe with water then test drove vehicle to confirm thermostat operates correctly and cooling system is at correct operating temperatures.
Mark S. gave our service a 5 star review on 2/4/2023
Tested both batteries and both failed below 120CCA, rated at 800CCA. Replace both batteries and recheck starting – ok.
SERVICE SPECIAL – INCLUDES 3 GALLONS OF OIL, FILTER AND 28 POINT VEHICLE INSPECTION.
Recovered 1.9lbs from system. Evacuate system and perform vacuum leak test – passed. Recharge with 2.2.25lbs R134a. Check outlet air temp and operating pressures – ok.
Randy W. gave our service a 5 star review on 1/7/2023